PATTON ELECTRONICS COMPANY 2070/DX Card Type Interface Converter Chip Set Unidentified I/O Options 15-pin DCE port, RJ-45 twisted pair interface, power Maximum Data Rate 64Kbps Data Bus External [Image] CONNECTIONS Function Label Function Label X.21 DCE port (15-pin CN1 UTP interface (RJ-45 CN2 connector) connector) Power CN3 USER CONFIGURABLE SETTINGS Setting Label Position » Local line loopback and G.703 loop S1/1 Off diagnostics disabled Local line loopback and G.703 loop S1/1 On diagnostics enabled » Terminal timing supplied by network S1/2 On signal Transmit clock generated internally S1/2 Off » Byte timing enabled S1/3 On Byte timing disabled S1/3 Off » Factory configured - do not alter S1/4 Off » AC power enabled JP1 Pins 1 & 3 closed Interface power enabled JP1 Pins 1 & 2 closed » Signal ground is connected to frame JP1 Pins 5 & 6 ground closed Signal ground is disconnected from JP1 Pins 4 & 6 frame ground closed DIAGNOSTIC LED(S) LED Color Status Condition SYNC Green On Valid synchronization to the terminal device exists SYNC Green Off Synchronization has slipped, or connection is broken TM Red On Device is conducting a loopback test TM Red Off Device is not conducting a loopback test